REACH Certification Spray Paint - High Gloss Finish For Automotive & Machinery

APPLICATION:

• Industrial Manufacturing:Applied to automotive parts, machinery protection, and metal corrosion protection.
• Professional Engineering:Suitable for furniture renovation and restoration, property maintenance, and commercial exhibition design.
• Individual Maker:Meets the needs of home beautification, model painting, and sports equipment maintenance.
• Specialty Industry:Provides maintenance solutions for maritime and custom electronic equipment.

DIRECTIONS FOR USE:

1. Cleaning: Thoroughly clean the application surface with alcohol to ensure it is free of oil and dust.
2. Sanding: Lightly sand the entire surface with 600-grit sandpaper to remove any surface gloss.
3. Masking: Use masking tape and film to precisely protect non-application areas.
4. Shaking: Shake the can vertically for 1 minute to ensure even mixing of the contents.
5. Test Spray: Test the spray finish and color on a piece of cardboard.
6. Spray: Hold the spray can 20-30 cm away from the surface. Keep the spray can moving at a constant speed, using a sweeping motion. Apply 2-3 thin coats, leaving 5-10 minutes between each coat (allow to dry to the touch and not sticky).
7. Curing: After construction is completed, let it stand for 24 hours before use; it will reach its best performance after 72 hours.

WARNINGS:

• Application Safety: Operate in a well-ventilated environment. Wearing a mask, goggles, and gloves is recommended.
• Storage Safety: Store in a cool, dry place away from heat, flames, and direct sunlight. Keep out of reach of children and pets.
• Material Tips: For difficult-to-bond materials such as polyethylene (PE), polypropylene (PP), and nylon, perform an adhesion test on an inconspicuous area or use a dedicated primer. Otherwise, the adhesive will easily peel.